HOTROD T/BOSS, SCRAM 250

• Manufactured from hot-rolled ASTM 4115 and case-hardened to 58-62 RC
• Feature the latest in caged needle roller bearing designs for high rpm
• Uniquely designed big end uses strategically located side scalloping and vent slots to minimize bearing race distortion at high rpm
• Shot-peened to eliminate surface stress risers and to smoothly blend together the rod forging's radiuses
• Double honing produces an ultra-round bearing surface for reliability at high rpm
• Small ends are double drilled to supply extra lubrication and cooling to the wrist pin bearing, which is especially important when the piston crown is close to the wrist pin bearing
• Rod assembly sold complete with rod, crank pin, crank pin bearing, top-end bearing and silver-coated bronze phosphur thrust washers

Fitment: CR168 - Polaris - Big Boss 250 4x6 - 1989 - 1994
Fitment: CR168 - Polaris - Big Boss 250 6x6 - 1989
Fitment: CR168 - Polaris - Big Boss 250 6x6 - 1991 - 1993
Fitment: CR168 - Polaris - Cyclone 250X - 1986 - 2002
Fitment: CR168 - Polaris - Scrambler 250 - 1985 - 1986
Fitment: CR168 - Polaris - SCRAMBLER 250 2X4 - 1985 - 1986
Fitment: CR168 - Polaris - Trail Blazer 250 - 1986 - 2006
Fitment: CR168 - Polaris - Trail Blazer 250 ES - 1996 - 1998
Fitment: CR168 - Polaris - Trail Blazer 250 Freedom - 2002 - 2003
Fitment: CR168 - Polaris - Trail Boss 250 - 1985 - 2002
Fitment: CR168 - Polaris - Trail Boss 250 2x4 - 1982 - 2002
Fitment: CR168 - Polaris - TRAIL BOSS 250 2X4 RES - 1988
Fitment: CR168 - Polaris - Trail Boss 250 4x4 - 1985 - 1999
Fitment: CR168 - Polaris - Trail Boss 250R/ES - 1987 - 1989
Fitment: CR168 - Polaris - TRAIL BOSS 325 2X4 - 2000 - 2002
Fitment: CR168 - Polaris - TRAIL BOSS 330 2X4 - 2003 - 2007
Fitment: CR168 - Polaris - TRAIL BOSS 350 L 6X6 - 1993
Fitment: CR168 - Polaris - Trail Boss 350L 2x4 - 1990 - 1993
Fitment: CR168 - Polaris - Trail Boss 350L 4x4 - 1990 - 1993
Fitment: CR168 - Polaris - TRAIL BOSS 400 L 2X4 - 1994 - 1995
Fitment: CR168 - Polaris - TRAIL BOSS 400 L 4X4 - 1994